Effects of annealing on bandgap and surface plasmon resonance enhancement in Au/SnO2 quantum dots

Au/SnO₂ quantum dots (AuSQDs) were synthesized, and the effects of annealing on their structural and optical properties were examined. Significant changes were observed in the bandgap and surface plasmon resonance (SPR) of the AuSQDs after thermal treatment at different temperatures (400, 500, and 600 °C). The properties of the as-prepared and annealed samples were characterized via X-ray diffraction analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy, and diffuse reflectance spectroscopy. Annealing reduced the bandgap from 3.03 to 2.33 eV and increased the crystallinity while maintaining an average crystallite size below 10 nm. XPS valence band (VB) profiles provided information regarding the VB edge potentials, which helped to determine the conduction band edge potentials. An enhancement in the SPR of the Au nanoparticles was observed for AuSQD-500, which had the smallest bandgap among the samples investigated.     

Synergistic effect of iodide ions and bark resin of Schinus molle for the corrosion inhibition of API5L X70 pipeline steel in H2SO4

The synergistic effect of bark resin of Schinus molle (BRSM) and iodide ions in 0.5 M sulfuric acid has been studied for the first time by potentiodynamic polarization and electrochemical impedance spectroscopy measurements; also, the surface morphology has been analyzed by scanning electron microscopy–energy-dispersive X-ray spectroscopic analysis in the present work. The results show that the BRSM and iodide ions have an evident synergistic inhibition effect in a 0.5-M sulfuric acid solution. The adsorption of the BRSM/iodide ion system follows the Langmuir adsorption isotherm and acts as a mixed-type inhibitor in sulfuric acid. The BRSM/iodide ion system is an effective inhibitor for API5L X70 pipeline steel in the 0.5-M sulfuric acid solution. The maximum percentage inhibition efficiency is equal to 99% at 1 g/L BRSM + 2 mM KI.     

考虑黏压效应的风电齿轮热弹流分析

在线接触热弹流润滑的基础上，考虑黏压效应，对风电行星轮系齿轮副进行热弹流润滑数值分析，并采用热弹流润滑数值方法和ISO/TS 6336-22计算了齿轮副的最小油膜厚度、安全系数和闪温温度，并比较各主要啮合点的压力和油膜厚度分布。结果表明：与使用ISO/TS 6336-22计算的结果对比，采用热弹流润滑理论计算的油膜更厚，但安全系数更小；在风电齿轮副热弹流润滑分析时应考虑压力对黏度的影响；风电主齿轮箱齿面因啮合产生油膜厚度随温度增加会迅速降低，最小油膜厚度会随载荷增加迅速减小，因此风电齿轮箱要保证足够的润滑，并尽量避免在高于额定载荷下长时间持续运行     

瓦斯抽采钻孔水射流协同修护技术研究与应用

瓦斯抽采钻孔普遍存在因变形、煤渣积聚及塌孔等导致钻孔堵塞和抽采效果差的问题。通过分析钻孔塌堵失稳机制,得出煤岩体性质、地质构造及多应力耦合条件是造成钻孔失稳的主要因素,进而推断相应堵孔段情形。利用高压水射流解堵作用,提出了水射流疏通-筛管护孔协同修护技术,并研制出轻型气动钻孔修复装备。应用结果表明,该协同修护技术能有效解决瓦斯抽采钻孔塌堵后无法有效抽采的技术难题,试验钻孔修护深度达到50 m,修护完成后单孔抽采瓦斯浓度和瓦斯纯流量比修复前提高0.57~3.67倍和0.99~5.15倍,抽采效果大幅改善,实现了塌堵钻孔的快速便捷修复进而确保了瓦斯流动通道的畅通。     

改性三氧化二锑协效二乙基次磷酸铝阻燃PA6研究

采用硅烷偶联剂（KH560）对三氧化二锑（Sb₂O₃）进行表面改性处理，并将其协效二乙基次磷酸铝（ADP）应用于聚酰胺6（PA6）阻燃研究。采用傅里叶变换红外光谱和热失重分析对改性Sb₂O₃进行表征，运用垂直燃烧、氧指数、锥形量热仪、热分析以及扫描电子显微镜和拉曼光谱等对阻燃PA6进行了阻燃性能及机理分析。结果表明，改性 Sb₂O₃与Sb₂O₃相比，与ADP具有更好的协同阻燃效应，其作用机制主要是在气相发挥阻燃作用；当ADP含量为8 %，改性Sb₂O₃含量为2 %时，阻燃PA6复合材料的UL 94等级达到V?0级，极限氧指数达到33.8 %。     

影响煤层气开发效果的地质因素再认识

地质特征认识对煤层气开发效果起着重要作用。在资源特征相差不大的情况下,发现煤层气相邻井的产量差异仍较大。排除工程因素后,通过选取8类地质参数,细致比对了保德区块低产井与邻井的参数特征,筛查出其关键因素为煤层微幅构造与顶板封盖条件,其中以微幅构造为主。据此,重新认识并划分出区块新的次生褶皱背斜单元、向斜单元和斜坡单元,获得了不同次生褶皱构造单元的开发特征。结果表明,高、低产井分布与次生褶皱背斜、向斜相关性高达92%。其中:高产井主要分布在次生褶皱背斜变化较缓、呈隆起状的“平台”,且煤层顶板以泥岩、碳质泥岩为主,封盖性较好;低产井主要分布在次生褶皱向斜,同一井台各井开发效果差异表现为从向斜条带轴部—向斜条带内—向斜条带外的煤层气井平均单井产量不断增加,到向斜轴部的距离大于向斜曲率半径73.5%的范围为主力产气区,小于向斜曲率半径40.0%范围为产水主力区。这对煤层气新井部署、生产管理、开发调整等,具有一定的指导意义。     

The primary dynamic gravimetric system for gas mass flow measurement

High accuracy mass flow measurement is an enabling technology at the base of many industries. HORIBA STEC Co., Ltd. developed its own primary gas mass flow measurement system. We employed the dynamic gravimetric method in a vacuum chamber, and we use only mass and time information for mass flow rate calculation, with no correction for temperature, pressure and humidity. The system achieved 0.036% uncertainty as lowest of results with satisfactory performance of proficiency testing with NIST (National Institute of Standards and Technology). Then the laboratory has been granted ISO/IEC 17025 accreditation since 2017. This paper describes the system details and uncertainty analysis.     

碎软煤层条带瓦斯地面高效抽采技术研究

为了提高碎软煤层条带瓦斯抽采效率和效果,基于目前地面瓦斯抽采主要采用垂直井或从式井的方式抽采效果差、效率低的现状,通过理论和实验分析论证了穿岩层压裂改造煤储层的可行性,提出了在目标煤层顶板岩层中钻水平井,并通过垂直向下射孔以及采用泵送桥塞分段进行压裂的方式进行地面瓦斯抽采。试验结果表明:顶板分段压裂水平井单井产量高、高稳产期更长、产量衰减更慢;有效水平井段控制区域内瓦斯下降均匀,更有利于进行条带瓦斯抽采;相同投资条件下,采用水平井的方式瓦斯抽采效率和投入产出比更高。